The Essential Guide to Replacing Lift Gate Car Boot Gas Struts

Are you going to replace the lift gate car boot gas struts on your vehicle? If so, then you’ve come to the right place. In this blog, we’ll be providing you with an essential guide to replacing lift gate car boot gas struts. We’ll cover everything from what these struts are, to why you might need to replace them, and we’ll even provide a step-by-step guide to replacing them. So, let’s get started!

What are Lift Gate Car Boot Gas Struts?

Lift gate car boot gas struts are hydraulic cylinders that are designed to support the lift gate or tailgate of a car. These struts are responsible for providing the force necessary to keep the car’s tailgate open or closed. They are usually located inside the car’s tailgate and can be easily identified by their black or silver, cylindrical shape.

When these struts are working properly, they can provide the necessary amount of force to keep the tailgate of a car in an open position until we close them. However, they can become worn out and need to be replaced over time.

Reasons for Replacing Lift Gate Car Boot Gas Struts

There are several reasons why you might need to replace your lift gate car boot gas struts. The most common reason is that the struts have become worn out and are no longer providing the necessary amount of force to keep the tailgate open. Other reasons include broken or missing struts accessories like a bracket or a screw.
In addition, you may need to replace your struts if they are leaking hydraulic fluid, as this can cause a wide range of issues, including a decrease in performance and an increase in noise levels.

How to Replace Lift Gate Car Boot Gas Struts

Replacing your lift gate car boot gas struts is not a difficult task, but it does require some time and patience. Before attempting to replace the struts, it’s important to gather the necessary tools and materials. We’ll discuss these in the next section.

1. Tools and Materials Needed

To replace your lift gate car boot gas struts, you’ll need a few basic tools and materials. These include: * A set of socket wrenches * A set of screwdrivers * A pair of pliers * A replacement gas strut (preferably an Apexstone gas strut) * An adjustable wrench

2. Step-by-Step Guide to Replacing Struts

Now that you have the necessary tools and materials, let’s take a look at the step-by-step guide to replacing your lift gate car boot gas struts.
Start by removing the old strut. To do this, use a pair of pliers to loosen the nut on the top of the strut. Once the nut has been loosened, you can remove the strut from the bracket.
Next, you’ll need to remove the old strut from the car. To do this, use a socket wrench to remove the bolts that are holding the strut in place.
Once the old strut has been removed, you can install the new strut. To do this, use the adjustable wrench to attach the new strut to the bracket.
Finally, use the socket wrench to secure the new strut in place.

3. Common Issues with Lift Gate Car Boot Struts

While replacing your lift gate car boot gas struts is a relatively straightforward process, there are a few common issues that you may encounter. For instance, if the bolts are too tight, you may not be able to remove them. In this case, you may need to use a lubricant to loosen them.

In addition, you may encounter issues if the old strut is stuck in the bracket. In this case, you may need to use a pair of pliers or a screwdriver to loosen the nut.

4. Tips and Tricks for Replacing Struts

When replacing your lift gate car boot gas struts, it’s always a good idea to take your time and double check your work. Make sure that the bolts are tight and that the strut is securely attached to the bracket.

In addition, make sure to use an Apexstone gas strut as this is one of the best quality struts on the market. These struts are designed to provide the necessary amount of force to keep your tailgate in an open or closed position.

Different Types of Gas Struts

When it comes to replacing your lift gate car boot gas struts, there are a few different types to choose from. The most common type is the standard gas strut, which is designed to provide the necessary amount of force to keep the tailgate open or closed.

In addition, there are also heavy-duty gas struts, which are designed for heavier lids. These struts are designed to provide a higher amount of force and can be used for applications such as truck tailgates or boat hatches.

Finally, there are also self-contained gas struts, which are designed to provide a consistent amount of force, regardless of the weight of the tailgate. These types of struts are ideal for applications such as garage doors or RV hatches.

Conclusion

Replacing your lift gate car boot gas struts is not a difficult task, but it does require some time and patience. In this blog, we provided you with an essential guide to replacing your lift gate car boot gas struts. We discussed everything from what these struts are, to why you might need to replace them, and we even provided a step-by-step guide to replacing them.

We also discussed the different types of gas struts, as well as some tips and tricks for replacing them. So, if you’re looking to replace your lift gate car boot gas struts, then make sure to follow the tips and tricks outlined in this blog. By the way, buy gas struts from Apexstone now and you will save up to 50%!