Looking to Replace Trunk Gas Springs? Here’s How to Do It

Apexstone gas spring well-lift-car-trunk

Is it time to replace your car’s trunk gas springs because it’s not staying open or it’s becoming harder to close? Trunk lift supports are responsible for holding the trunk open, but they can wear out or break over time, which can pose a danger to anyone opening or closing it. Replacing trunk struts may seem daunting, one way is to contact an auto repair shop to do it but the cost is relatively high, another way is to do it on our own because it’s a relatively simple DIY project that you can finish in about 20 mins.

To replace malfunctioning or worn-out trunk struts, follow these easy steps:

1. Lift your car trunk to the largest degree: ask someone to hold the trunk open while you work. Alternatively, use a stick or something similar to support the trunk, please rest assured that it’s securely propped open before you start working on it.

2. Prepare the accessories to remove the trunk gas struts: you should prepare a flathead screwdriver and a fresh gas struts replacement for your car trunk, removing the new package for later use.

3. Remove the metal clips of the gas spring end fittings: the retaining clips can fix the gas springs. For various end fittings of different gas springs, the clips for different. The most common type is integral retaining clip grips and wire safety clips. For integral retaining clip grips, using the flathead screwdriver can easily loosen it. For the wire safety clip, we can untie it directly by hand.

a-pair-of-Plastic-end-fittings-8mm
Integral retaining clip grips

4. Replace the fresh trunk gas spring: After loosening the retaining clips, pull out the old trunk gas springs, repeat it in another 3 ball joint or plastic end fittings. Then take one piece of new trunk springs and insert them into the holes where the old ones were. Please note to put the rod down will make the gas struts a damping performance, and also can extend the struts’ lifespan. Press your hand on the end fittings to snap it into place on your car. Check and ensure that each lift support locks into the correct place.

5. Test the performance of your new trunk lid pistons: Remove the holding stick and slowly close the trunk, then open the trunk and repeat this process at least 3 times to ensure that they’re working correctly. Make sure that the gas struts can keep the trunk stays open and can be closed smoothly.

This is all process of replacing trunk shock absorbers, anyone can do it in 20 mins even for the first time. Follow these easy steps and try it now.

If you’re looking for high-quality lift support for your vehicle, Apexstone online shop is an excellent choice. They are a leading manufacturer and supplier of high-quality gas springs and related accessories with over a decade of experience in the industry. Apexstone offers an extensive selection of trunk struts for various makes and models, with over 100 products available. Order your replacement trunk gas springs today and get up to 60% off. Contact their customer service if you have any questions or need help finding the right product for your car.

Share This Post

More To Explore

Shopping Cart